General Discussions
New European Committee for Electrotechnical Standardization CENELEC Updates

Part 2-78 - Medical electrical equipment: Special requirements for safety and essential performance for medical robots for rehabilitation assessment, compensation, or alleviationSIST EN IEC 8601-2-78 :2020
IEC 80601-2-8:78:2019 covers the requirements for BASIC SAFETY AND ESSENTIAL PERFORMANCE OF MEDICAL ROBOTS who physically interact with a patient with an IMPAIRMENT to support OR perform REHABILITATION. ASSESSMENT, COMPENSATION, ALLEVIATION and COMPENSATION related to the PATIENT’S MOVEMENT FUNCTIONS. This is as per the MANUFACTURER. IEC 80601-278:2019 is not applicable to: External limb prosthetic devices (use ISO 22523), Electric wheelchairs (use ISO 7176 all parts), * Diagnostic imaging equipment (e.g. IEC 60601-2-33.3 is the IEC for MRI and ISO 13482. For personal care ROBOTS, use ISO 13482. For more info see CENELEC Standards. CENELEC is the European Committee for Electrotechnical Standardization

Safety for household appliances and similar electrical appliances - Part 2-6: Special requirements for stationary cook ranges, hobs and ovens and other similar appliances
SIST EN 60335-2-6:2015/A1:2020
Next Action: A PART OF A PACKAGE
2018-10-01: NAC received a positive assessment on 2018-10-01. BT doc to be prepared and submitted for 4 weeks consultation
2018-09-14 CV - Positive assessment expected (info courtesy of NAC), but not yet uploaded to HAS Livelink folder -- BT doc available for publication pending official assessment
2018-09-06 CV - A new request for assessment was sent on 2018-08-12. EN 60335-2-6.2015/FprA1(PR=63514) & EN 60335-2-6.2015/FprAA/PR=62259) were voted upon, but without Annex ZZ. These projects were not able to proceed. CLC/TC 61 was responsible for the Annex ZZ. If the LVD consultant gives a positive assessment, it will be included in EN 60335-2-6.2015/FprAA. (PR=62259). Both EN 60335-2-6-2015/FprA1 and EN 60335-2-6–2015/FprAA will be published if both are positive. (PR=63514)
2018-06-25 - Consultant's assessment is missing from CDV stage

Fuel cell technologies – Part 8-101 - Energy storage systems using fuel cells modules in reverse mode - Test procedures to determine the performance of solid-oxide single cells and stacks.
SIST EN IEC 62282-8-10-101:2020
IEC 62282-8-10:2020 refers to solid oxide cell (SOC), and stack assembly unit(s). It includes instruments, testing systems and methods for measuring the performance of SOC cells/stack assemblies units for energy storage. It evaluates the performance of SOC cells/stack assembly units in fuel cell mode, electrolysis mode, and/or in reverse operation. This document can be used to exchange data between cell/stack makers and system developers, or for acquiring data about a cell or stack to determine the system's performance. This document allows users to select test items that are suitable for their purpose and execute them. You can substitute some of the test methods in this document with IEC TS 62282-7-2 equivalents for SOC operation only in fuel cell mode.

Part 2-66 - Medical electrical equipment: Specific requirements for basic safety and essential performance hearing aids and hearing aid system
SIST EN IEC 60601-2-6:2020
IEC 60601-266:2019 is now available as IEC60601-266:2019 RLV. This contains the International Standard as well as its Redline version. It covers the BASIC SAFETY for HEARING AIDS, and HEARING AID SYSTEMS. Also known as ME EQUIPMENT, or ME SYSTEM, IEC 60601-266:2019. IEC 60601-2-66.6:2019 replaces and cancels the 2015 edition. This is a technical revision. This edition contains the following technical changes in comparison to the previous edition.

Overhead lines - Tests and requirements for spacers
SIST EN IEC 61854 :2021
IEC 61854 2020 is also available as IEC618542020 RLV. This contains the International Standard and its Redline Version, which shows all changes to the technical content. It applies to conductor bundles for overhead lines. It includes rigid, flexible and spacer dampers. This does not cover interphase spacers or hoop spacers. This document covers the most common line design practices and the spacers currently in use at the time. You may have other spacers that are not covered in this document. Sometimes, the test procedures and values are decided between supplier and purchaser. These are listed in the contract. The best way for the purchaser to assess the service conditions is to determine the severity of the test. The minimum technical details that must be agreed between the supplier and purchaser are listed in Annex A. This second edition replaces the 1998 edition. This edition is a technical revision. This edition contains the following technical changes in comparison to the previous edition. a) Examine the use of spacers on high-temperature conductors for additional tests in clamp slip and for the characterisation of elastic and damping characteristics; and b) Introduce a simpler test device to simulate short circuit current; and c) Change the procedure for subspan oscillation testing spacers with rod attachments to spacers; and g) Modify test procedures for aeolian vibrating tests; and j Keywords: Spacers, Overhead Lines

Part 2-78 - Medical electrical equipment: Special requirements for safety and essential performance for medical robots for rehabilitation assessment, compensation, or alleviationSIST EN IEC 8601-2-78 :2020 IEC 80601-2-8:78:2019 covers the requirements for BASIC SAFETY AND ESSENTIAL PERFORMANCE OF MEDICAL ROBOTS who physically interact with a patient with an IMPAIRMENT to support OR perform REHABILITATION. ASSESSMENT, COMPENSATION, ALLEVIATION and COMPENSATION related to the PATIENT’S MOVEMENT FUNCTIONS. This is as per the MANUFACTURER. IEC 80601-278:2019 is not applicable to: * External limb prosthetic devices (use ISO 22523),* Electric wheelchairs (use ISO 7176 all parts), * Diagnostic imaging equipment (e.g. IEC 60601-2-33.3 is the IEC for MRI and ISO 13482. For personal care ROBOTS, use ISO 13482. For more info see [CENELEC Standards. CENELEC is the European Committee for Electrotechnical Standardization](https://standards.iteh.ai/catalog/standards/clc "CENELEC Standards. CENELEC is the European Committee for Electrotechnical Standardization") Safety for household appliances and similar electrical appliances - Part 2-6: Special requirements for stationary cook ranges, hobs and ovens and other similar appliances SIST EN 60335-2-6:2015/A1:2020 Next Action: A PART OF A PACKAGE 2018-10-01: NAC received a positive assessment on 2018-10-01. BT doc to be prepared and submitted for 4 weeks consultation 2018-09-14 CV - Positive assessment expected (info courtesy of NAC), but not yet uploaded to HAS Livelink folder -- BT doc available for publication pending official assessment 2018-09-06 CV - A new request for assessment was sent on 2018-08-12. EN 60335-2-6.2015/FprA1(PR=63514) & EN 60335-2-6.2015/FprAA/PR=62259) were voted upon, but without Annex ZZ. These projects were not able to proceed. CLC/TC 61 was responsible for the Annex ZZ. If the LVD consultant gives a positive assessment, it will be included in EN 60335-2-6.2015/FprAA. (PR=62259). Both EN 60335-2-6-2015/FprA1 and EN 60335-2-6–2015/FprAA will be published if both are positive. (PR=63514) 2018-06-25 - Consultant's assessment is missing from CDV stage Fuel cell technologies – Part 8-101 - Energy storage systems using fuel cells modules in reverse mode - Test procedures to determine the performance of solid-oxide single cells and stacks. SIST EN IEC 62282-8-10-101:2020 IEC 62282-8-10:2020 refers to solid oxide cell (SOC), and stack assembly unit(s). It includes instruments, testing systems and methods for measuring the performance of SOC cells/stack assemblies units for energy storage. It evaluates the performance of SOC cells/stack assembly units in fuel cell mode, electrolysis mode, and/or in reverse operation. This document can be used to exchange data between cell/stack makers and system developers, or for acquiring data about a cell or stack to determine the system's performance. This document allows users to select test items that are suitable for their purpose and execute them. You can substitute some of the test methods in this document with IEC TS 62282-7-2 equivalents for SOC operation only in fuel cell mode. Part 2-66 - Medical electrical equipment: Specific requirements for basic safety and essential performance hearing aids and hearing aid system SIST EN IEC 60601-2-6:2020 IEC 60601-266:2019 is now available as IEC60601-266:2019 RLV. This contains the International Standard as well as its Redline version. It covers the BASIC SAFETY for HEARING AIDS, and HEARING AID SYSTEMS. Also known as ME EQUIPMENT, or ME SYSTEM, IEC 60601-266:2019. IEC 60601-2-66.6:2019 replaces and cancels the 2015 edition. This is a technical revision. This edition contains the following technical changes in comparison to the previous edition. Overhead lines - Tests and requirements for spacers SIST EN IEC 61854 :2021 IEC 61854 2020 is also available as IEC618542020 RLV. This contains the International Standard and its Redline Version, which shows all changes to the technical content. It applies to conductor bundles for overhead lines. It includes rigid, flexible and spacer dampers. This does not cover interphase spacers or hoop spacers. This document covers the most common line design practices and the spacers currently in use at the time. You may have other spacers that are not covered in this document. Sometimes, the test procedures and values are decided between supplier and purchaser. These are listed in the contract. The best way for the purchaser to assess the service conditions is to determine the severity of the test. The minimum technical details that must be agreed between the supplier and purchaser are listed in Annex A. This second edition replaces the 1998 edition. This edition is a technical revision. This edition contains the following technical changes in comparison to the previous edition. a) Examine the use of spacers on high-temperature conductors for additional tests in clamp slip and for the characterisation of elastic and damping characteristics; and b) Introduce a simpler test device to simulate short circuit current; and c) Change the procedure for subspan oscillation testing spacers with rod attachments to spacers; and g) Modify test procedures for aeolian vibrating tests; and j Keywords: Spacers, Overhead Lines
3
0
1
live preview
enter atleast 10 characters
WARNING: You mentioned %MENTIONS%, but they cannot see this message and will not be notified
Saving...
Saved
With selected deselect posts show selected posts
All posts under this topic will be deleted ?
Pending draft ... Click to resume editing
Discard draft